Print/Matt Reflection

20170608_085623-01
20170608_085623-01
What is your element? Name and atomic number My element is Germanium and it’s atomic number is 32.
My element, history, function/use and so on. Germanium was discovered in 1886 in Freiberg, Germany by a man named Clemens Winkler. Its symbol is Ge. Germanium is a metalloid. Germanium is used to make transistors for use in electronic devices. Germanium is also used as an alloying agent (adding 1% germanium to silver stops it from tarnishing), in fluorescent lamps and as a catalyst. The element is non-toxic. Fun fact, Germanium is another element that was predicted by Mendeleev in 1871(His predictions for what would be the atomic number, weight, and properties were very close to germanium actual characteristics.). The origin of its name come from a Latin name for Germany, ‘Germania’.
How did you get the idea for the imagery you chose? To get the idea for my print, I had to think of a picture that can relate to my element. Since germanium was used in lamps, I did the design of the candle lamp. Also it the transistors gave me the idea of sketching a phone.
What process did you go through to make this print? Well first I did some research on my element. Next I sketch some drawings and pick the best one that can represent germanium. Then I had to finalize my sketch on a 4x6 paper. Then I had to transfer my drawing onto tracing paper. Next, I did negative and positive drawing onto the styrofoam plate. Finally, I print the image onto paper by printing the image onto the plate, transfer the plate on the paper, rub it into the paper with a wooden spoon, and slowly lift the paper from the plate, leaving the image onto the paper. Then I cut out the image and paste it in the center of a 6x8 inch construction paper.
What would you do differently if you did this print a second time? For one, I would do a little bit more research on my element to get a better understanding. Also, I would redo my negative and positive with my plate, I kind of messed up a bit.
What part of the project did you enjoy the most? Describe the step and what you liked so much about it. The part I like the most was the paint transfer. So first, I had to paint onto the plate and roll it out with a roller. Then I laid it down onto a piece of paper and press down onto the paper with a wooden spoon. Finally, I slowly lift the paper from the plate, leaving the image onto the paper. I really like seeing the outcome when it’s separated. Also, it was quite easy.

Final Matt Print- Indium


Hello! My name is Asnain Khan and I am currently a freshman at Science Leadership Academy. In my Art class we did a 4 weeks long project, called “Element Prints.” To complete this project, everyone was assigned a element. Then, we did some research and sketched some pictures that relate to our element. After that, we finalized our sketches and picked a final sketch. Following this, we traced and transferred our sketch. Then, we printed it and matt printed.

 

The element I was assigned is indium. Indium is a chemical element with symbol In and atomic number 49. Indium was discovered by the German chemists Ferdinand Reich and Hieronymus Theodor Richter in 1863. Reich and Richter had been looking for traces of the element thallium in samples of zinc ores. A brilliant indigo line in the sample's spectrum revealed the existence of indium. Indium is about as abundant as silver but is much easier to recover since it typically occurs along with zinc, iron, lead and copper ores.

 

Indium is used to coat the bearings of high speed motors since it allows for the even distribution of lubricating oil. Indium is used to dope germanium to make transistors. It is also used to make other electrical components such as rectifiers, thermistors and photoconductors. Indium can be used to make mirrors that are as reflective as silver mirrors but do not tarnish as quickly. Indium is also used to make low melting alloys.

 

I chose an image of a TV because indium is found in the screen of TV’s. I didn’t know this, so I thought it would be interesting to do a TV. I explained the process I had to go through to make this print, in the first paragraph. If I had to do this all over again, I would probably change my image to a tool. That’s because indium is mostly used to make tools.

 

I really enjoyed working on this project. My most favorite part was when we actually printed our image. That part was really enjoyable. It was a great project!  


Copper Print/Matt

FullSizeRender (12)
FullSizeRender (12)
My element was copper, it has an atomic number of 29. Copper is a really old element and has been around since the beginning of times. It was thought to be used in the middle east sometime around 9000 B.C. Now days copper is used to make electrical equipment. Copper is a good conductor of electricity and heat, therefore copper is mainly used to make wires.Back then copper was also used to make pennies before it was replaced with zinc. Since I knew cooper was really old I wanted something to represent that. I knew that a timeline is used to represent time and the words B.C (before christ) and A.D (anno Domini) means era’s that are really old and new. So, I decided to make a timeline with the words B.C and A.D on the ends and the symbol of copper in the center to represent how old Copper is. When it actually came to making my print, it was fairly simple. First I sketched out my drawing, then I transferred it to tracing paper. After, I transfered it to the actual stamp board and outlined my sketch, then we put the ink over and transferred it to paper and set it to dry. After, we placed our print on a matt. If I could do this print a second time, something I would do differently would be adding more detail to my actual drawing. I feel like my drawing was fairly simple and I would want to elaborate more on it. In conclusion, the part I enjoyed most about this was inking my print, when we rolled the ink on it and then transferred it to another page. I liked putting color to my sketch and making it come to life.

Printing/Matting

My element is Silver. Its atomic number is 47 and chemical symbol is Ag. Silver is one of the first metals to be discovered alongside gold and copper. It wasn't commonly used in the past other than being used as currency besides gold. Now it's more commonly used in jewelry and and in metallic sculptures. The image I chose to print is a sculpture. It's a upside down arc with a heart in the middle. There weren't a lot of unique things I could make with silver, drawing a coin would've been expected and boring so instead, I chose to do something pretty and unique. To make my print I had transfer my drawing to a plate by carving it with a dull pencil making an outline. Next time, I'd choose a different design because I think there could've been more designs that I could made with silver. The part I enjoyed the most was actually printing my design because it came out better than I thought it would. I'm very proud of it. 
FullSizeRender (9)
FullSizeRender (9)

Element print and Mat reflection

20170608_090838
20170608_090838
My element is called Argon and the atomic number of Argon is 18.
Agron  Sir William Ramsay(a scottish chemist) and Lord Rayleigh( an english chemist) discovered this element. It’s name comes from a greek word which means lazy. It’s odorless and colorless noble gas. It can be used to fill light bulbs which prevents oxygen from destroying the hot filament.I got the idea because of it's use which prevents oxygen from breaking the hot filament in a light bulb.First I had to brainstorm an idea which became this light bulb. Next I copied my final drawing on a 4 by 6 card, but I had to flip the paper over backwards, so when I apply the ink to the card it would print right when I lay it on a piece of paper. I would try to apply the right amount ink so I could get a clean print. Also the cracks are there because this was like my fifth print so my printing card was kind of ware down with each print.What I liked the most about this project is the fact that I got to make art in such a creative way and I just wish next time in didn't have to be about the periodic table. Overall though this was a really cool project, and I wouldn't mind at all if I had to do it again. 

Day 1 & 2 Print/Matt Jack Eagen

IMG_2010
IMG_2010

My element was Cobalt, it´s abbreviation was Co and atomic number was 27. My element was discovered in 1735. It has been and still is used to turn vases blue. To make this print first we had to create three different designs that we wanted to use for our prints. I choose the one that I thought was the best and made the final design. Then I put my design on a plate backwards so it would print out correctly. Finally I rolled ink on it and then printed it on paper. Then for one of my prints I created a paper background. If I was to do this a second time I think all I would do different was be more consistent with the paint. Other than that I think I did a good job. But that was still the best part of the project. I had a lot of fun painting everything and then pasting it on paper. It was fun because it was very relaxing and very cool to see the final product.


Print/Matt -- Derek Jordan

File_000 (18)
File_000 (18)

My element is named sulfur and the atomic number is 16. It is a nonmetal and the atomic symbol is S. Sulfur is in the bible with the name brimstone and it is mentioned in the Odyssey. It was discovered in 1777 by Antoine Lavoisier. He discovered that it was an element and not a compound. Sulfur takes up 3% of the earth’s mass, so I included an earth and with a “3%” on it. I did this because I thought it was the best way to represent that sulfur is 3% of the earth’s mass. I first brainstormed ideas for my print, and chose a final idea. Once we had our final design on paper, we traced it onto tracing paper. After that, we carved our design onto a plate. We then rolled paint onto the plates and then pasted them on a piece of paper. After one week, the paint dried and we cut out the pictures and pasted them onto a paper with a one inch frame. I would have made my design a little less complicated if I were to do it again. It is difficult to completely understand the idea of my print/matt at first glance. I enjoyed making the design for our print. It was fun researching our element and brainstorming possible ideas for our print.

Final Stamp Design

IMG_20170608_084643_437-02
IMG_20170608_084643_437-02
The name of my element is Chromium and it's Atomic Number is 24. It was first discovered by Louis-Nicholas Vauquelin in 1797.  While experimenting on something called Siberian red lead (crocoite), he mixed it with hydrochloric acid to create Chromium.  Chromium's main use is for making vehicle parts for cars and bicycles.  It's most interesting use, however, is that it's used in the making of many pigments.  A form of Chromium was also used on Terracotta Warrior's weapons to keep them from rusting.
The reason I chose to make my stamp resemble a pile of pigment was because that use of Chromium was so interesting to me.  Making a car or bike stamp seemed too boring to me and making a pigment pile was rather simplistic to draw so I decided to go with the second idea.  Then I had to make a final design on another piece of paper, which would be used to trace onto a piece of foam (it's easy to create divots in it so when painted over lines will appear) which would be used for the actual stamp.  During the  process I had to redraw it because it was too small and I never got a really smooth looking print so that was a bit annoying.
If I could do the print all over again, I would probably make the design a bit more complex.  After finishing this project, and looking at everybody else's, it made me think I did too little.  I would also probably want to try making the prints again.  The prints all had some imperfection about them and were never covered completely in a smooth layer of red paint.  It was all rather problematic to me.  What I DID enjoy about the project was creating the designs for the print. It was fun to make creative ways to convey what your element was.

Aluminium Print/Matte

My element is Aluminum AL, the atomic number is 13. Sir Humphry in 1809 named the element aluminum and then Britain editor in 1812 wrote it as aluminum due to it harmonizing with many other element names like sodium and potassium. The way I got the idea for the imagery I chose was due to the history of the use of aluminum, I found out that the Apollo 11 spacecraft was made out of aluminum. so I thought that was a good idea to design a space ship landing on the moon. The process I went through to make this print was drawing out the image on a normal piece of paper then I copied it on tracing paper and then I copied it backward on the plate foam paper and identified the negative space by denting the foam on the plate paper. Something I would do differently is not shaded in the negative space and should just outline stuff just so it could look neater. The part of the project that I liked the most was the printing process when we were adding the paint on the image. The steps to complete this process is taking the brayer and dipping it in the printing ink and then rolled it evenly in it and then rolled it evenly again against the foam paper.

FullSizeRender (26)
FullSizeRender (26)

Week 9 - Day 1 & 2 print/matt

My element was zinc and its atomic number is 30.

Zinc has been around since the 16th century and it is used in many ways including pennies and medicines. All living things need zinc to survive.

I was interested in the fact that all living things need zinc, so I settled on a nature themed print. I made the N attached to the Z like roots and both letters have leaves coming off of them.

I knew that I wanted to make it nature themed, so I didn’t go through many iterations before I had my final design.

If I did this again, I would probably make the lines deeper so there was more contrast.

I enjoyed matting the print because it was very satisfying to rip the excess paper around the print.

IMG_2575
IMG_2575
IMG_2574
IMG_2574
IMG_2571
IMG_2571

Week 9 - Day 1 & 2 Print/Matt

My element is Vanadium. Its symbol is "V", and its atomic number is 23. Vanadium is a metal that is found in space, but very rarely. It can be isolated artificially, which causes it to become oxidized. A man discovered it in Mexico in 1801. He found it in a metal that also had lead with it and discovered that it was new. It wasn't until 1867 that the element was gotten alone in its purest form. By reducing vanadium chloride, the metal could be produced in mass amounts. It was used in building race cars and metal tools. It is sometimes also found in meteorites with a lot of different mineral forms. 
The fact that it is found in meteorites caught my attention. I knew I wanted to surround my print's focus on a meteorite. I also learned though that they are found by using a spectrometer, a tool that bends light to see metals. They're often used in astronomy to analyze the makeup of stars and spot these meteorites. Light coming from the sun and other stars aids this process. That is why there is a lens around my meteorite. 
My original sketch looked a lot like the final here. I started with the lens so I could have a centered and balanced print. Then, I made the shape of a meteorite to show it. The whole thing felt a bit empty, so I added more detail in the lens, including stars to symbolize their light that is used in the identification of the vanadium meteorites. Since I had to include its symbol and atomic number, I thought that the number could sit on the outside of the lens. That was fine, so I tried doing the same with the letter. The symmetry was a little cluttered and unnerving. I found that having the symbol taking up a larger space and going into the lens brought the whole thing together. 
If I did this again, I would make the atomic number a little smaller. I may have paid more attention to the detail within the details too. This could result in a more realistic meteorite. 
My favorite part of this whole thing was identifying the positive and negative space. Originally, there was more negative space. Since we are in space though, hence the meteorite theme, I wanted it to be darker. Having so much darkness in the image was satisfying. 

Matted Print -- Zivia Brown (WIP)

unnamed (9)
unnamed (9)
  1. What would you do differently if you did this print a second time?
  2. What part of the project did you enjoy the most? Describe the step and what you liked so much about it.

The element used for my print project was Arsenic, with the atomic number of 33 and an atomic mass of 74.9216 g.mol-1 . This element has been mined since ancient times, but was officially discovered by Albertus Magnus in 1250 A.D. when he was experimenting with a heated soap and orpiment mixture. Arsenic has a wide variety of uses. It is commonly used in rat and insect poison, but has also been used as a medicine and additive to poultry food to protect against infection. Arsenic is also used in semiconductors, bronzing, hardening shot, making glass and preserving wood. You can also find Arsenic is chemical compounds such as arsenic trioxide, sodium arsenite, arsenic trichloride, arsenic pentoxide, arsenic acid, and arsenates. It's a pretty useful element!
For my image, I decided to focus on Arsenic's use in rat poison. This may sound weird, but being a lover of the movie Watership Down, I am was intrigued by the way animals, namely rodents and rabbit, reacted as they died. This image has elements of that movies art style and key attributes, such as the focus on the mouth and chin from the underside with the eyes barely visible. I had other designs, such as one involving soap and one with LED lights, but this one was my favorite.
As for my process, there were many steps. After I had my lineart for my picture, I then had to decide what would be the positive and what would be the negative space. I then used a sharpie to fill in what would be my negative space (this space acted as positive space at some points). After this, I traced and transferred just the outlines of my image to a piece of tracing paper. I then flipped the paper over so the letters and numbers were backwards, and used a pencil to press through the lines on the paper and onto a foam base. This would serve as my printing plate. I would then roll ink on the plate and press it onto paper, flip it over, and use a wooden spoon to press it down. This transferred my image right side up, and then I was done!
If I were to redo anything about my project, I think I would make the atomic number more clear and straighter. There is to much slanting in my image with both the 

Element Print

My element is Antimony. Its chemical symbol is Sb and its atomic number is 51. One cool fact about antimony is that in acient egypt, it was used to make the eyeliner they called Kohl. This is why you see the design of the "Eye of Horus" in my print. I wanted to symbolize Egypt and that time period, so I chose that design because it is something associated with Egypt. 
When making this print, I sketched a few possible designs for my element. I decided on this because I thought it would give a different type of design then expected. This is something many people didn't know, so I thought it would be interesting design to choose. After choosing my design, I traced it onto a piece of thin foam, backwards, so if you had any words or letters, they would be correctly faced when you made the print. We used a brayer to apply the ink to the foam board, and then placed that onto a sheet of paper and repeated this a few times until we got 3 good prints. 
If I did this print again I would make sure everything looked straight and centered so it is more appealing to the eye. My favorite part of this project was coming up with different designs for our elements. I liked it because I was able to think creatively about something I normally think about in a creative way. 
20170608_084551-1
20170608_084551-1

Element Print and Matt - Reflection

This is the final print of my element, Silicon.
This is the final print of my element, Silicon.
In this blog post, I will be reflecting on the process I went through to create my print.
  1. The element I was given was Silicon, which is number 14 in the table of elements. Silicon can be shortened to SI. 
  2. Silicon was first found by Jacob Berzelius. He was heating up chips of Potassium to observe what resulted, and Silicon accidentally formed. It is primarily used to create computer chips and tools used in machines. It can be utilized in the process of deoxidizing and is used to manufacture soaps.
  3. My idea for this print came from the discovery of Silicon. Since chips of Potassium were heated up to form the element, my mind immediately went to potato chips. The bag has flames on it, which shows it is the hot flavor. This shows that Silicon was discovered by heating up chips of Potassium.
  4. The process aI went through was a simple one. I first sketched out my three rough ideas, and chose what I thought would be the best to use. Once I did, I drew the sketch again, and I traced it onto tracing paper. This tracing paper was used to carve our design into foam. Using paint and a brayer, we rubbed paint onto a tray and then into a foam board. This foam board was then pressed face down onto paper so that the print would be finalized on paper. On our last day, we cut out our two best prints, placed one on a mat with a one-inch border, and another had no mat. This process was now finished and our prints were done.
  5. If I could redo this project, I would have carved the "SI" into the foam better. It was supposed to go in the logo, but it never showed because the carve was too shallow. I would try and carve it better so that it would show up, because it was an essential for our final print.
  6. I really enjoyed the process of brainstorming. I enjoy doing research usually, so it was nice to research a topic I did not know much about. We usually learn about all of the elements together, not separately, so it was interesting to learn about one in specific. I never knew how many uses one element could have until doing this research for the brainstorming. 

Plutonium Print

The element I created an art piece for is Plutonium, with the atomic number of 94. 
The name plutonium came from the planet Pluto, which was thought at the time to be the greatest planet beyond Neptune. Since the previous element discovered was Neptunium, Plutonium came to be from the planet Pluto and the "ium" from Neptunium. Plutonium was once used in a bomb in 1945, during WWII. Its fuel was also known to be used as rocket fuel, and its power is used in power plants.
I came up with the idea for my final imagery by looking up plutonium and searching through various images of the dangerous element. One image showed the radioactive symbol attached to a plant, representing Plutonium as a "power plant." Since Plutonium is used in power plants, this image stuck with me and I recreated it, but above an actual power plant. The smoke cloud and every other small detail in my final image came from my original idea, of representing a Plutonium power plant.
The process of making this print was complicated at times. We had to go through stages of sketching and ideas, and then put our actual image onto a foam rectangle that would be painted over later. Once we painted over it, we had to then press it onto paper to copy the image over. To make the image look right, we had to draw our images backwards on the foam rectangle. Then, the image pressed onto paper accurately with any words and images facing upright. At times this was complicated, because sometimes the print didn't copy over well if there wasn't enough paint. But, it was an interesting and fun process full of learning.
If I had to print a second time, I definitely would have made sure my drawing didn't touch the edges of the paper or foam rectangle, because when painting over this and printing it, the edges faded off the paper and weren't seen. If I did this again, I would just make sure the image itself was slightly smaller than the paper it was drawn on, so every part could be seen.
The part I enjoyed most was the sketching and drawing phase. I enjoy this step most because it is full of creativity. Also, I like this because it is the best time to collaborate with people and determine which work is best or has the best potential. Sketching and drawing is my favorite, because I like to free draw and not have it be a final decision or image.

Blog Negative/Positive Space - Cut Out

My negative space is the dark green, its the darkest piece of my art work. The negative space is the most eye catching thing, it helps the artist to effect as the "real" subject of an image. i found my negative space by looking for the darkest color you had. it enhances the art because, it allows the artwork to be eye catching. 
Screenshot 2017-04-27 at 10
Screenshot 2017-04-27 at 10

Bismuth Element Print

  1. What is your element? My element is Bismuth and its atomic number 83. It has 83 protons, 126 neutrons and 83 protons. Its chemical symbol is Bi

  2. Tell the reader about your element, history, function/use and so on. Bismuth was discovered in 1753 by Claude Geoffroy. Bismuth can be melted down and mixed with other metals to create low melting alloys, these are used to make electrical fuses, fire detectors, sprinklers and much more. Bismuth is also used as a yellow pigment in paint and makeup. It is also most popularly used in pepto bismol. Bismuth is a rainbow element, its solid form takes it shape in a star case design.

  3. How did you get the idea for the imagery you chose? I got the idea for my print my thinking about the composition of the solid element. I knew that the shape was very rectangular with twisting and sharp edges. I also knew that the element was very colorful, and the chemical symbol is Bi. So I took these three facts to create my design. I drew a rainbow made of squares and turns cascading over the symbol Bi. I made the rainbow to represent the colors of Bismuth, and also to represent the symbol Bi (like bisexual). You could also interpret the image as a cave, with dripping liquids falling from the roof and pooling into the Bi. This was meant to represent pepto bismol and the liquid state of the element.  

  4. What process did you go through to make this print? I spent lots of time carving my image into the foam plate. I really wanted to have large parts of the image that would not soak up ink, so I put effort into carving sections over and over again. I thought the image it self turned out well except for the atomic number. I attempted to put the number, 83, inside the clouds on the side of the rainbow but it didn't show up. When it came to the printing stage I had difficulty coating the carving fulling in ink. It would turn out blotchy and lifeless when ever I transfered it to paper. Then I learned to press harder into the plate in order for an image to be printed. After this tip my prints became much better.

  5. What would you do differently if you did this print a second time? If I did this print a second time I would have made a simpler and less messy design. That way the ink wouldn't be confused as to where to lay.

  6. What part of the project did you enjoy the most? Describe the step and what you liked so much about it. I enjoyed the printing/inking stage the most because it allowed me to put color to the image I imagined to be colorful. I also liked it because it was fun to be creative and slightly messy with our art work. In this stage we needed to roll ink onto our prints, and then transfer them to paper with the pressure of a wooden spoon.


 

 


Screen Shot 2017-06-08 at 10.17.05 AM
Screen Shot 2017-06-08 at 10.17.05 AM

Seven as a Buddy Cop Movie. Mark + Kwame

https://youtu.be/wkLg0uVMas4

 

For my Film Conversion project, I chose to adapt the Neo-Noir Se7en into a buddy cop film. I chose this because throughout the film there are several comedic moments in an otherwise dark film that could easily to be framed to be the focal point of the story. In one particular scene all of the characters burst out laughing because of the state of Detective Mills’s apartment. I wanted to see what it would be like to have a trailer to the film be focused on the lighter moments.

 

Noir films generally follow the story of a detective encountering the underbelly of society, while buddy cop films generally tell the story of an unlikely bromance forming. Seven is a synthesis of these two genres, featuring main characters exploring the nightmarish underbelly of society and becoming friends over the course of the film. The tone of seven is what separates it from both a noir and buddy cop movie, that of a serious and brooding psychological thriller. Adapting the tone was the greatest struggle of making the trailer, since it is so consistent throughout the entire film, as well as being so far removed from that of a buddy cop movie.

 

The first step in changing the movie was selecting the clips for the trailer. I chose to focus on more neutral and comedic moments, since these wouldn’t rely or extend the original tone. Then I laid out the clips in a cohesive order to tell the story of Mills and Somerset becoming partners despite their reluctance. I established the villian, their dysfunctional relationship, and how they could solve it. The trailer ends with the villain turning themselves in an event that's originally dramatic, but now comedic based on placement and timing. Finally I wrapped up the trailer with some light hearted music, something that could’ve been found in a comedy trailer. Music is an integral part of the storytelling process as well as carrying the emotional weight of a moment.


Na'eem Q4

For my last quarter, I really exercised all my skills I learned throughout this year to create beautiful. My first assignment was very digital so it was exciting making art without a piece of paper! Then I went into body sketches which is always tough to execute. After that, I learned about sketching in 30 seconds which wasn't fun. I then took a try at digital art again. I will have to say that the optical illusion project was my favorite. I really enjoyed this quarter art!

Graffiti Is Unknown?

 

Graffiti is widely known, but where? Where do you see any types of graffiti? Does this hurt you in any way? Where do you specifically see it in the suburbs or urban areas? These questions were answered in my last blog post and if you have not read it, then get caught up now and get the scoops on what’s happening everyday in the heart of Philadelphia and other areas. In my first blog post I had discussed the realities of living in a community where graffiti is considered vandalism. In some ways it is considered vandalism, but the looks of it being vandalism is only on private property, when someone writes on someone else’s belongings. Read on to find out more about Graffiti and the gateways of it being “vandalism”.

 

"No person shall carry an aerosol spray paint can...with intent to violate the current (graffiti) laws in place". This quote is from the current graffiti laws in New York which somewhat implies in the city of Philadelphia also. The article also talks about the police having to assume anyone carrying a spray paint bottle is convicted of committing a crime, which is violating private and public walls.

For our “You and the World” project, we were to decide which of the following to choose from. My choice was a survey. 50 out of 50 people took my survey and answered from their point of view and opinion. They all had a say and they all said mainly the same things.

 

If you had read my first blog post that I had written it focused on some of the problems of graffiti. My idea for my agent of change was to host a graffiti run and some of my ideas for the graffiti run was just the vibe that graffiti gave off. I had also made a survey for people to fill out.

About 50 people took my survey (I took a picture of this graph before I had 50 responses).  Screenshot 2017-05-19 at 7.09.20 PM.png


Body Image: What I found out

After doing research on “Body Image” and how body image effects people. I learned about how having a negative body image can badly impact a person and their self esteem. Some people tend to get this idea of the perfect body image from social media. I also talked about how models body image is portrayed is unrealistic but they are who people strive to be like them.

Since my last blog post, I have created a survey on how people in the Science Leadership Academy (SLA) community actually feel about their body image. Throughout the time that my Survey has been up and people were taking it, I have encountered an incident where body image comes into play. I have just joined the cheerleading team at SLA Beeber, and one of the first things said to me was “Are you ok with losing 5 pounds?” At the time I wasn’t really thinking about it, I was just excited to be on the team. However after going home I realized how my project is so relevant in our community. I know the reason behind them asking me to lose 5 pounds, I need to be lightweight, however incidents like these can really impact a person.

My plan for my original research was to create a survey that would tell me how people in SLA feel about their bodies, if people think models have the perfect body, if they could change any part of their body what would they change and what type of social media user they are. After 2 weeks of people taking my survey I received 55 responses. 34 females took my survey, 20 males and 1 preferred not to say. One of the questions I asked was “On a scale from 1 to 10 how do you feel about your body?” these are the responses I got.


FullSizeRender (8)
FullSizeRender (8)

After seeing the data I got from my survey, I was surprised to see how diverse people feel about their bodies. I noticed that none of the 55 people who took my survey rated their body a 10. 17 people said they felt 5 or lower about their body, which means that some people don't really feel that well about their bodies. As I kept looking at my responses I noticed that 20% of the people who took my survey said that they agreed that models have the perfect body image when asked if they agreed or disagreed that models have the perfect body image.


FullSizeRender (7)
FullSizeRender (7)

I wanted to see if there was a connection between the people that felt 5 or lower about their bodies and the people who thought that models have the perfect body image. I found out that the majority of the people who felt 5 or less about their bodies agreed that models have the perfect body image. This was shocking for me because I learned how models body image is photoshopped sometimes and are an unrealistic body image goal.

Along with my previous questions I wanted to know what people would change about themselves if they could what they would change. The most common things people wanted to change were their stomach, they wanted to be curvier, and some wanted clear skin. People said they wanted a flatter stomach, bigger butts and clear skin. Overall I was surprised to see the responses I got from my survey. I have learned that models do play a part on the way that people view themselves. And that the people in the SLA community have insecurities about themselves. This is something that can affect so many people. For my agent of change I plan to share this information with my advisory in a presentation. And hopefully this will change their mindsets or make them aware of the issue.

For more information of my research visit my Annotated bibliography.